PRSTAT(1M) Maintenance Commands PRSTAT(1M)


NAME


prstat - report active process statistics

SYNOPSIS


prstat [-acHJLmRrtTvWZ] [-d u | d] [-C psrsetlist] [-h lgrplist]
[-j projlist] [-k tasklist] [-n ntop[,nbottom]]
[-p pidlist] [-P cpulist] [-s key | -S key ]
[-u euidlist] [-U uidlist] [-z zoneidlist]
[interval [count]]


DESCRIPTION


The prstat utility iteratively examines all active processes on the
system and reports statistics based on the selected output mode and sort
order. prstat provides options to examine only processes matching
specified PIDs, UIDs, zone IDs, CPU IDs, and processor set IDs.


The -j, -k, -C, -p, -P, -u, -U, and -z options accept lists as arguments.
Items in a list can be either separated by commas or enclosed in quotes
and separated by commas or spaces.


If you do not specify an option, prstat examines all processes and
reports statistics sorted by CPU usage.

OPTIONS


The following options are supported:

-a
Report information about processes and users. In this mode prstat
displays separate reports about processes and users at the same time.


-c
Print new reports below previous reports instead of overprinting
them. Long names are not truncated in this mode.


-C psrsetlist
Report only processes or lwps that are bound to processor sets in the
given list. Each processor set is identified by an integer as
reported by psrset(1M). The load averages displayed are the sum of
the load averages of the specified processor sets (see
pset_getloadavg(3C)). Processes with one or more LWPs bound to
processor sets in the given list are reported even when the -L option
is not used.


-d u | d
Specify u for a printed representation of the internal representation
of time. See time(2). Specify d for standard date format. See
date(1).


-h lgrplist
Report only processes or lwps whose home lgroup is in the given list
of lgroups. No processes or lwps will be listed for invalid lgroups.


-H
Report information about home lgroup. In this mode, prstat adds an
extra column showing process or lwps home lgroup with the header
LGRP.


-j projlist
Report only processes or lwps whose project ID is in the given list.
Each project ID can be specified as either a project name or a
numerical project ID. See project(4).


-J
Report information about processes and projects. In this mode prstat
displays separate reports about processes and projects at the same
time. A trailing asterisk marks a long name that has been truncated
to fit the column.


-k tasklist
Report only processes or lwps whose task ID is in tasklist.


-L
Report statistics for each light-weight process (LWP). By default,
prstat reports only the number of LWPs for each process.


-m
Report microstate process accounting information. In addition to all
fields listed in -v mode, this mode also includes the percentage of
time the process has spent processing system traps, text page faults,
data page faults, waiting for user locks and waiting for CPU (latency
time).


-n ntop[,nbottom]
Restrict number of output lines. The ntop argument determines how
many lines of process or lwp statistics are reported, and the nbottom
argument determines how many lines of user, task, project or zone
statistics are reported if the -a, -t, -T, -J or -Z options are
specified. By default, prstat displays as many lines of output that
fit in a window or terminal. When you specify the -c option or direct
the output to a file, the default values for ntop and nbottom are 15
and 5.


-p pidlist
Report only processes whose process ID is in the given list.


-P cpulist
Report only processes or lwps which have most recently executed on a
CPU in the given list. Each CPU is identified by an integer as
reported by psrinfo(1M).


-R
Put prstat in the real time scheduling class. When this option is
used, prstat is given priority over time-sharing and interactive
processes. This option is available only for superuser.


-r
Disable lookups for user names and project names. (Note that this
does not apply to lookups for the -j, -u, or -U options.)


-s key
Sort output lines (that is, processes, lwps, or users) by key in
descending order. Only one key can be used as an argument.

There are five possible key values:

cpu
Sort by process CPU usage. This is the default.


pri
Sort by process priority.


rss
Sort by resident set size.


size
Sort by size of process image.


time
Sort by process execution time.


-S key
Sort output lines by key in ascending order. Possible key values are
the same as for the -s option. See -s.


-t
Report total usage summary for each user. The summary includes the
total number of processes or LWPs owned by the user, total size of
process images, total resident set size, total cpu time, and
percentages of recent cpu time and system memory.


-T
Report information about processes and tasks. In this mode prstat
displays separate reports about processes and tasks at the same time.


-u euidlist
Report only processes whose effective user ID is in the given list.
Each user ID may be specified as either a login name or a numerical
user ID.


-U uidlist
Report only processes whose real user ID is in the given list. Each
user ID may be specified as either a login name or a numerical user
ID.


-v
Report verbose process usage. This output format includes the
percentage of time the process has spent in user mode, in system
mode, and sleeping. It also includes the number of voluntary and
involuntary context switches, system calls and the number of signals
received. Statistics that are not reported are marked with the -
sign.


-W
Truncate long names even when prstat would normally print them in
full. A trailing asterisk marks a long name that has been truncated
to fit the column.


-z zoneidlist
Report only processes or LWPs whose zone ID is in the given list.
Each zone ID can be specified as either a zone name or a numerical
zone ID. See zones(5).


-Z
Report information about processes and zones. In this mode, prstat
displays separate reports about processes and zones at the same time.
A trailing asterisk marks a long name that has been truncated to fit
the column.


OUTPUT


The following list defines the column headings and the meanings of a
prstat report:

PID
The process ID of the process.


USERNAME
The real user (login) name or real user ID. A trailing asterisk
marks a long name that has been truncated to fit the column.


SWAP
The total virtual memory size of the process, including all mapped
files and devices, in kilobytes (K), megabytes (M), or gigabytes (G).


RSS
The resident set size of the process (RSS), in kilobytes (K),
megabytes (M), or gigabytes (G). The RSS value is an estimate
provided by proc(4) that might underestimate the actual resident set
size. Users who want to get more accurate usage information for
capacity planning should use the -x option to pmap(1) instead.


STATE
The state of the process:

cpuN
Process is running on CPU N.


sleep
Sleeping: process is waiting for an event to complete.


wait
Waiting: process is waiting for CPU usage to drop to the CPU-caps
enforced limits. See the description of CPU-caps in
resource_controls(5).


run
Runnable: process in on run queue.


zombie
Zombie state: process terminated and parent not waiting.


stop
Process is stopped.


PRI
The priority of the process. Larger numbers mean higher priority.


NICE
Nice value used in priority computation. Only processes in certain
scheduling classes have a nice value.


TIME
The cumulative execution time for the process.


CPU
The percentage of recent CPU time used by the process. If executing
in a non-global zone and the pools facility is active, the percentage
will be that of the processors in the processor set in use by the
pool to which the zone is bound.


PROCESS
The name of the process (name of executed file).


LWPID
The lwp ID of the lwp being reported.


NLWP
The number of lwps in the process.


With the some options, in addition to a number of the column headings
shown above, there are:

NPROC
Number of processes in a specified collection.


MEMORY
Percentage of memory used by a specified collection of processes.


The following columns are displayed when the -v or -m option is specified

USR
The percentage of time the process has spent in user mode.


SYS
The percentage of time the process has spent in system mode.


TRP
The percentage of time the process has spent in processing system
traps.


TFL
The percentage of time the process has spent processing text page
faults.


DFL
The percentage of time the process has spent processing data page
faults.


LCK
The percentage of time the process has spent waiting for user locks.


SLP
The percentage of time the process has spent sleeping.


LAT
The percentage of time the process has spent waiting for CPU.


VCX
The number of voluntary context switches.


ICX
The number of involuntary context switches.


SCL
The number of system calls.


SIG
The number of signals received.


Under the -L option, one line is printed for each lwp in the process and
some reporting fields show the values for the lwp, not the process.


The following column is displayed when the -H option is specified:

LGRP
The home lgroup of the process or lwp.


OPERANDS


The following operands are supported:

count
Specifies the number of times that the statistics are repeated. By
default, prstat reports statistics until a termination signal is
received.


interval
Specifies the sampling interval in seconds; the default interval is 5
seconds.


EXAMPLES


Example 1: Reporting the Five Most Active Super-User Processes




The following command reports the five most active super-user processes
running on CPU1 and CPU2:


example% prstat -u root -n 5 -P 1,2 1 1

PID USERNAME SWAP RSS STATE PRI NICE TIME CPU PROCESS/LWP
306 root 3024K 1448K sleep 58 0 0:00.00 0.3% sendmail/1
102 root 1600K 592K sleep 59 0 0:00.00 0.1% in.rdisc/1
250 root 1000K 552K sleep 58 0 0:00.00 0.0% utmpd/1
288 root 1720K 1032K sleep 58 0 0:00.00 0.0% sac/1
1 root 744K 168K sleep 58 0 0:00.00 0.0% init/1
TOTAL: 25, load averages: 0.05, 0.08, 0.12


Example 2: Displaying Verbose Process Usage Information




The following command displays verbose process usage information about
processes with lowest resident set sizes owned by users root and john.


example% prstat -S rss -n 5 -vc -u root,john

PID USERNAME USR SYS TRP TFL DFL LCK SLP LAT VCX ICX SCL SIG PROCESS/LWP
1 root 0.0 0.0 - - - - 100 - 0 0 0 0 init/1
102 root 0.0 0.0 - - - - 100 - 0 0 3 0 in.rdisc/1
250 root 0.0 0.0 - - - - 100 - 0 0 0 0 utmpd/1
1185 john 0.0 0.0 - - - - 100 - 0 0 0 0 csh/1
240 root 0.0 0.0 - - - - 100 - 0 0 0 0 powerd/4
TOTAL: 71, load averages: 0.02, 0.04, 0.08


EXIT STATUS


The following exit values are returned:

0
Successful completion.


1
An error occurred.


SEE ALSO


date(1), lgrpinfo(1), plgrp(1), proc(1), ps(1), time(2), psrinfo(1M),
psrset(1M), sar(1M), pset_getloadavg(3C), proc(4), project(4),
attributes(5), resource_controls(5), zones(5)

NOTES


The snapshot of system usage displayed by prstat is true only for a
split-second, and it may not be accurate by the time it is displayed.
When the -m option is specified, prstat tries to turn on microstate
accounting for each process; the original state is restored when prstat
exits. See proc(4) for additional information about the microstate
accounting facility.


The total memory size reported in the SWAP and RSS columns for groups of
processes can sometimes overestimate the actual amount of memory used by
processes with shared memory segments.


November 14, 2014 PRSTAT(1M)