kctl_isadep.c should support four serial consoles
uses an associative array to store four console properties:
input-device, output-device, ttya-mode, ttyb-mode
It should be enhanced to store ttyc-mode and ttyd-mode
as well. This would allow:
to obtain properties for all four serial consoles.
Updated by Gary Mills almost 10 years ago
- Assignee set to Gary Mills
- % Done changed from 0 to 80
The change to kctl_pcache_create() is pretty simple.
I've tested this change on a system with a Tyan motherboard that
includes a BMC device. Using serial-over-lan access with ipmitool,
the console is on ttyc. With either `boot -kd' or `boot -k', it now
correctly identifies the console. `mdb -K' always worked on the
serial console and is not affected by this change.