Bug #4346
closed
mpt_sas failed with 'mptsas bad flash signature'
0%
Description
i have LSI 9208i controlled with connected one SATA drive.
i have created a zpool.
I have created a dataset and tried to copy files, but after some files copied i see messages with stuck of copy operation:
Nov 22 03:47:59 srv249 genunix: [ID 483743 kern.info] /scsi_vhci/disk@g50014ee0ae2c983a (sd28) multipath status: degraded: path 1 mpt_sas8/disk@w50014ee0ae2c983a,0 is online
Nov 22 03:47:59 srv249 last message repeated 1 time
Nov 22 03:48:02 srv249 statd510: [ID 859811 daemon.warning] statd: host ipv4.172.16.99.90 is not responding
Nov 22 03:48:32 srv249 statd510: [ID 859811 daemon.warning] statd: host ipv4.172.16.90.86 is not responding
Nov 22 03:55:03 srv249 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,2e21@1/pci1000,72@0 (mpt_sas6):
Nov 22 03:55:03 srv249 Disconnected command timeout for Target 9
Nov 22 03:55:33 srv249 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,2e21@1/pci1000,72@0 (mpt_sas6):
Nov 22 03:55:33 srv249 mptsas_ioc_task_management failed try to reset ioc to recovery!
Nov 22 03:55:33 srv249 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,2e21@1/pci1000,72@0 (mpt_sas6):
Nov 22 03:55:33 srv249 mptsas bad flash signature!
Nov 22 03:55:33 srv249 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,2e21@1/pci1000,72@0 (mpt_sas6):
Nov 22 03:55:33 srv249 mptsas_restart_ioc failed
Nov 22 03:55:33 srv249 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,2e21@1/pci1000,72@0 (mpt_sas6):
Nov 22 03:55:33 srv249 Target 9 reset for command timeout recovery failed!
Nov 22 03:56:03 srv249 genunix: [ID 408114 kern.info] /pci@0,0/pci8086,2e21@1/pci1000,72@0 (mpt_sas6) down
Nov 22 03:56:43 srv249 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,2e21@1/pci1000,72@0 (mpt_sas6):
Nov 22 03:56:43 srv249 Disconnected command timeout for Target 9
Nov 22 03:57:13 srv249 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,2e21@1/pci1000,72@0 (mpt_sas6):
Nov 22 03:57:13 srv249 mptsas_ioc_task_management failed try to reset ioc to recovery!
Nov 22 03:57:13 srv249 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,2e21@1/pci1000,72@0 (mpt_sas6):
Nov 22 03:57:13 srv249 mptsas bad flash signature!
Nov 22 03:57:13 srv249 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,2e21@1/pci1000,72@0 (mpt_sas6):
Nov 22 03:57:13 srv249 mptsas_restart_ioc failed
Nov 22 03:57:13 srv249 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,2e21@1/pci1000,72@0 (mpt_sas6):
Nov 22 03:57:13 srv249 Target 9 reset for command timeout recovery failed!
Nov 22 03:57:43 srv249 genunix: [ID 408114 kern.info] /pci@0,0/pci8086,2e21@1/pci1000,72@0 (mpt_sas6) down
Updated by Igor Kozhukhov over 9 years ago
- Status changed from New to Closed
found issue with my HW.
for the record.
i have LSISA9211-8i card.
i have MB ASUS P5Q SE2.
bios 0601 - faster, but has no bios32 feature.
bios 0801 - very slow, but has bios32 feature.
based on info on LSI site: http://mycusthelp.info/LSI/_cs/AnswerDetail.aspx?sSessionID=&aid=8352
Note: The DOS version of sas2flsh requires that the motherboard support the BIOS32 service directory feature. If the BIOS32 service directory feature isn't supported, when DOS is booted and sas2flsh.exe is run, an error message "ERROR: Failed to initialize PAL. Exiting program."
bios32 feature need for card work, not only for flash.