Actions
Feature #5209
open
Support for Brocade 1860 16Gbps FC HBA
Status:
New
Priority:
Normal
Assignee:
-
Category:
-
Start date:
2014-10-03
Due date:
% Done:
0%
Estimated time:
Difficulty:
Medium
Tags:
needs-triage
Gerrit CR:
External Bug:
Description
This is a request to support Brocade 1860 16Gbps FC HBA.
Currently prtconf reports it as "Brocade 1860 16Gbps FC HBA", pci id pci1657,24 .
Linux supports it using bfa driver and reports the following information about it:
16:00.0 Fibre Channel: Brocade Communications Systems, Inc. 1867/1860: 16Gbps/10Gbps Fabric Adapter (rev 01)
Subsystem: Brocade Communications Systems, Inc. 16Gbps FC HBA
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at c45c0000 (64-bit, non-prefetchable) [size=256K]
Region 2: Memory at c4570000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at c6000000 [disabled] [size=2M]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] MSI-X: Enable+ Count=64 Masked-
Vector table: BAR=2 offset=00000000
PBA: BAR=2 offset=00008000
Capabilities: [60] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <256ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <256ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] Vital Product Data
Product Name: IBM Flex System FC5022 2-Port 16Gb FC Adapter\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00
Read-only fields:
[V0] Vendor specific: \\x09\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00
[PN] Part number: 88Y6372\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00
[EC] Engineering changes: N28622D\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00
[V1] Vendor specific: FRU Number: 88Y6373\\x00\\x00\\x00\\x00\\x00
[SN] Serial number: 88Y6372Y052UZ3N100D
[RV] Reserved: checksum good, 3 byte(s) reserved
Read/write fields:
[Y1] System specific: OFMENA\\x02\\x02\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x02\\x00\\x06\\x00\\x01\\x00\\x01\\x00\\x02\\x00\\x06\\x00\\x02
[RW] Read-write area: 217 byte(s) free
End
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [180 v1] Power Budgeting <?>
Capabilities: [190 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 1
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [1a0 v1] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
IOVSta: Migration-
Initial VFs: 4, Total VFs: 4, Number of VFs: 4, Function Dependency Link: 00
VF offset: 8, stride: 1, Device ID: 0022
Supported Page Size: 00000553, System Page Size: 00000001
Region 0: Memory at 00000000c4400000 (64-bit, non-prefetchable)
Region 2: Memory at 00000000c4440000 (64-bit, non-prefetchable)
VF Migration: offset: 00000000, BIR: 0
Capabilities: [270 v1] Device Serial Number 00-47-50-ff-7c-8c-00-10
Capabilities: [280 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 04
ATSCtl: Enable-, Smallest Translation Unit: 00
Kernel driver in use: bfa
Updated by Juraj Lutter almost 7 years ago
Alexander Pyhalov wrote:
This is a request to support Brocade 1860 16Gbps FC HBA.
Currently prtconf reports it as "Brocade 1860 16Gbps FC HBA", pci id pci1657,24 .Linux supports it using bfa driver and reports the following information about it:
[...]
Is there any news with this? It would be very handy to have such support.
Updated by Steven D over 4 years ago
I recently acquired some of these cards and would love to use then in OmniOS. Any chance of that happening?
Actions