Project

General

Profile

Actions

Bug #9758

closed

Double fault when booting new Ryzen system

Added by Gary Mills over 3 years ago. Updated over 3 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Category:
kernel
Start date:
2018-08-20
Due date:
% Done:

0%

Estimated time:
Difficulty:
Medium
Tags:
needs-triage
Gerrit CR:

Description

Here we go again, but this is with the new Raven Ridge series of Ryzen CPUs. The CPU is a Ryzen 3 2200G with built-in graphics, although I'm not using the internal graphics at present. This system has an ASUS Prime B350M-A/CSM motherboard and 8 gigs of memory. It boots with the loader. This is part of what I get on a serial console when booting OI-hipster-gui-20180427:

startup.c:1793: startup_modules: calling prom_setup...^M^M
startup.c:1795: startup_modules: done^M^M
startup.c:1800: startup_modules: calling psm_modload...^M^M
startup.c:1803: startup_modules() done^M^M
startup.c:2263: startup_end() starting...^M^M
startup.c:2306: Calling configure()...^M^M
^M^M
^M^Mpanic[cpu0]/thread=0: BAD TRAP: type=8 (#df Double fault) rp=fffffffffbc43bb0 addr=0^M^M
^M^M
#df Double fault^M^M
pid=0, pc=0xfffffffffb8639a0, sp=0xf000eef3f000e2c3, eflags=0x10082^M^M
cr0: 8005003b<pg,wp,ne,et,ts,mp,pe> cr4: 6f8<xmme,fxsr,pge,mce,pae,pse,de>^M^M
cr2: 9f07000cr3: e000000cr8: 0^M^M
^M^M
        rdi:                0 rsi:                0 rdx:                0^M^M
        rcx:                0  r8: fffffffffbc7abc0  r9:                0^M^M
        rax: f000eef3f000e2c3 rbx: fffffffffbc39780 rbp: fffffffffbc7a160^M^M
        r10:                0 r11: fffffffffb82c130 r12: fffffffffbc7a1d0^M^M
        r13:         fbc39780 r14:                0 r15:                0^M^M
        fsb:        200000000 gsb: fffffffffbc39780  ds:                0^M^M
         es:                0  fs:                0  gs:                0^M^M
        trp:                8 err:                0 rip: fffffffffb8639a0^M^M
         cs:               30 rfl:            10082 rsp: f000eef3f000e2c3^M^M
         ss:               38^M^M
tss.tss_rsp0:   0xfffffffffbc7ab78^M^M
tss.tss_rsp1:   0x0^M^M
tss.tss_rsp2:   0x0^M^M
tss.tss_ist1:   0xfffffffffbc43ca0^M^M
tss.tss_ist2:   0x0^M^M
tss.tss_ist3:   0x0^M^M
tss.tss_ist4:   0x0^M^M
tss.tss_ist5:   0x0^M^M
tss.tss_ist6:   0x0^M^M
tss.tss_ist7:   0x0^M^M
^M^M
Warning - stack not written to the dump buffer^M^M
fffffffffbc43a90 unix:die+89 ()^M^M
fffffffffbc43ba0 unix:trap+c95 ()^M^M
fffffffffbc7a160 unix:_patch_xrstorq_rbx+18f ()^M^M
fffffffffbc7a1c0 unix:do_interrupt+a8 ()^M^M
fffffffffbc7a1d0 unix:_interrupt+ba ()^M^M
fffffffffbc7a2c0 unix:cmntrap+e1 ()^M^M
fffffffffbc7a3e0 unix:cf_check_compressed+64 ()^M^M
fffffffffbc7a410 unix:bufs_open+104 ()^M^M
fffffffffbc7a470 unix:BRD_OPEN+ae ()^M^M
fffffffffbc7a4a0 unix:kobj_boot_open+35 ()^M^M
fffffffffbc7a510 unix:kobj_open+102 ()^M^M
fffffffffbc7a570 unix:kobj_open_file+20 ()^M^M
fffffffffbc7a5f0 unix:kobj_open_path+112 ()^M^M
fffffffffbc7a650 unix:kobj_load_module+6c ()^M^M
fffffffffbc7a6d0 genunix:mod_load+23b ()^M^M
fffffffffbc7a730 genunix:mod_hold_installed_mod+6d ()^M^M
fffffffffbc7a7b0 genunix:modrload+dd ()^M^M
fffffffffbc7a7d0 genunix:modload+17 ()^M^M
fffffffffbc7a820 genunix:mod_hold_dev_by_major+bf ()^M^M
fffffffffbc7a850 genunix:ndi_hold_driver+2b ()^M^M
fffffffffbc7a880 genunix:probe_node+1c ()^M^M
fffffffffbc7a8d0 genunix:i_ndi_config_node+d0 ()^M^M
fffffffffbc7a900 genunix:i_ddi_attachchild+48 ()^M^M
fffffffffbc7a950 genunix:i_ddi_attach_node_hierarchy+6c ()^M^M
fffffffffbc7a990 genunix:attach_driver_nodes+b2 ()^M^M
fffffffffbc7a9d0 genunix:i_ddi_attach_pseudo_node+2f ()^M^M
fffffffffbc7a9f0 genunix:i_ddi_init_root+195 ()^M^M
fffffffffbc7aa00 unix:configure+24 ()^M^M
fffffffffbc7aa20 unix:startup_end+7e ()^M^M
fffffffffbc7aa30 unix:startup+5a ()^M^M
fffffffffbc7aa70 genunix:main+3b ()^M^M
fffffffffbc7aa80 unix:_locore_start+90 ()^M^M
^M^M
^M^M
panic: entering debugger (no dump device, continue to reboot)^M^M

Welcome to kmdb
kmdb: unable to determine terminal type: assuming `vt100'
Actions

Also available in: Atom PDF