Project

General

Profile

Bug #8151

Updated by Joshua M. Clulow over 3 years ago

Today I upgraded OI/hipster on my computer. The latest version includes the UBS3 driver. My computer has a USB3 controller and a few USB3 ports.
So I tried to see if the USB3 driver is working. Before going into the details, I have to say that the driver is NOT working in my case. First of all here is
what prtconf -d shows:

<pre>
pci1849,7052 (pciex1b6f,7052) [Etron Technology, Inc. EJ188/EJ198 USB 3.0 Host Controller], instance #0
</pre>


The driver is loaded:

<pre>
$ usr/sbin/modinfo |grep xhci
101 fffffffff8757000 fb68 309 1 xhci (USB xHCI Driver)
</pre>


I have several USB 2,0 tnumb disks and I plugged in one into the USB3 port. The file system is mounted but it is useless! I can only see what is stored
on the USB thumb disk. It is impossible to copy from the USB disk or to the disk. Here is what the system reports when I try to mount and use an NTFS formated
disk using ntfs-3g:

<pre>
May 3 20:56:19 adalind ntfs-3g[5078]: [ID 702911 daemon.notice] Version 2016.2.22AR.1 external FUSE 27
May 3 20:56:19 adalind ntfs-3g[5078]: [ID 702911 daemon.notice] Requested device /dev/dsk/c5t0d0p1 canonicalized as /devices/pci@0,0/pci1002,597e@9/pci1849,7052@0/storage@2/disk@0,0:r
May 3 20:56:19 adalind ntfs-3g[5078]: [ID 702911 daemon.notice] Mounted /devices/pci@0,0/pci1002,597e@9/pci1849,7052@0/storage@2/disk@0,0:r (Read-Write, label "KINGSTON", NTFS 3.1)
May 3 20:56:19 adalind ntfs-3g[5078]: [ID 702911 daemon.notice] Cmdline options:
May 3 20:56:19 adalind ntfs-3g[5078]: [ID 702911 daemon.notice] Mount options: allow_other,nonempty,relatime,fsname=/devices/pci@0,0/pci1002,597e@9/pci1849,7052@0/storage@2/disk@0,0:r
May 3 20:56:19 adalind ntfs-3g[5078]: [ID 702911 daemon.notice] Ownership and permissions disabled, configuration type 5
May 3 20:57:31 adalind xhci: [ID 902155 kern.info] NOTICE: xhci0: xhci stop endpoint command (3)/slot (1) in wrong state: 19
May 3 20:57:31 adalind xhci: [ID 617155 kern.info] NOTICE: xhci0: endpoint is in state 3
May 3 20:57:35 adalind xhci: [ID 902155 kern.info] NOTICE: xhci0: xhci stop endpoint command (0)/slot (1) in wrong state: 19
May 3 20:57:35 adalind xhci: [ID 617155 kern.info] NOTICE: xhci0: endpoint is in state 3
May 3 20:57:35 adalind scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci1002,597e@9/pci1849,7052@0/storage@2/disk@0,0 (sd3):
May 3 20:57:35 adalind SCSI transport failed: reason 'timeout': retrying command
May 3 20:58:36 adalind xhci: [ID 902155 kern.info] NOTICE: xhci0: xhci stop endpoint command (3)/slot (1) in wrong state: 19
May 3 20:58:36 adalind xhci: [ID 617155 kern.info] NOTICE: xhci0: endpoint is in state 3
</pre>


Some time ago I tried test the driver from an experimental ISO. Unfortunately, I have to say that I see no difference between the
experimental driver and this one.

Back