Bug #5230

Updated by Yuri Pankov over 4 years ago

 NOTICE: System detected 256 cpus, but only 1 cpu(s) were enabled during boot. 
 NOTICE: Use "boot-ncpus" parameter to enable more CPU. See eeprom(1M). 

 Full Console output: 
 module /platform/i86pc/kernel/amd64/unix: text at [0xfffffffffb800000, 0xfffffffffb96563b] data at 0xfffffffffbc00000 
 module /kernel/amd64/genunix: text at [0xfffffffffb965640, 0xfffffffffbbedfaf] data at 0xfffffffffbc95640 
 Loading kmdb... 
 module /kernel/misc/amd64/kmdbmod: text at [0xfffffffffbd05610, 0xfffffffffbdbc577] data at 0xfffffffffbdbc580 
 module /kernel/misc/amd64/ctf: text at [0xfffffffffbbedfb0, 0xfffffffffbbf8907] data at 0xfffffffffbdd85c0 

 Welcome to kmdb 
 kmdb: unable to determine terminal type: assuming `vt100' 
 Loaded modules: [ unix krtld genunix ] 
 [0]> :c 
 OpenIndiana Build oi_151a8 64-bit (illumos 7256a34efe) 
 SunOS Release 5.11 - Copyright 1983-2010 Oracle and/or its affiliates. 
 All rights reserved. Use is subject to license terms. 
 x86_feature: lgpg 
 x86_feature: tsc 
 x86_feature: msr 
 x86_feature: mtrr 
 x86_feature: pge 
 x86_feature: de 
 x86_feature: cmov 
 x86_feature: mmx 
 x86_feature: mca 
 x86_feature: pae 
 x86_feature: cv8 
 x86_feature: pat 
 x86_feature: sep 
 x86_feature: sse 
 x86_feature: sse2 
 x86_feature: htt 
 x86_feature: asysc 
 x86_feature: nx 
 x86_feature: sse3 
 x86_feature: cx16 
 x86_feature: cmp 
 x86_feature: tscp 
 x86_feature: cpuid 
 x86_feature: ssse3 
 x86_feature: sse4_1 
 x86_feature: sse4_2 
 x86_feature: clfsh 
 x86_feature: 64 
 x86_feature: pclmulqdq 
 x86_feature: xsave 
 x86_feature: rdrand 
 mem = 1740408K (0x6a39e000) 
 SMBIOS v2.4 loaded (300 bytes)root nexus = i86pc 
 pseudo0 at root 
 pseudo0 is /pseudo 
 scsi_vhci0 at root 
 scsi_vhci0 is /scsi_vhci 
 Reading Intel IOMMU boot options 
 pci0 at root: space 0 offset 0 
 pci0 is /pci@0,0 
 PCI-device: isa@1, isa0 
 PCI-device: pci5853,1@3, xpv0 
 xpv0 is /pci@0,0/pci5853,1@3 
 xpvd0 at root 
 xdf@768, xdf0 
 xdf0 is /xpvd/xdf@768 
 /xpvd/xdf@768 (xdf0) online 
 xdf@768: 16777216 blocksxdf@51728, xdf4 
 xdf4 is /xpvd/xdf@51728 
 /xpvd/xdf@51728 (xdf4) online 
 xdf@51728: 16384000 blocksxdf@5632, xdf1 
 xdf1 is /xpvd/xdf@5632 
 /xpvd/xdf@5632 (xdf1) online 
 xdf@5632: 1016824 blocks/xpvd/xnf@0 (xnf0) online 
 pseudo-device: acpippm0 
 acpippm0 is /pseudo/acpippm@0 
 pseudo-device: ppm0 
 ppm0 is /pseudo/ppm@0 
 IDE device at targ 0, lun 0 lastlun 0x0 
 ATA/ATAPI-7 supported, majver 0xf0 minver 0x16 
 PCI-device: ide@0, ata0 
 ata0 is /pci@0,0/pci-ide@1,1/ide@0 
 UltraDMA mode 5 selected 
 cmdk0 at ata0 target 0 lun 0 
 cmdk0 is /pci@0,0/pci-ide@1,1/ide@0/cmdk@0,0 
 root on rpool/ROOT/openindiana fstype zfs 
 /cpus (cpunex0) online 
 pseudo-device: dld0 
 dld0 is /pseudo/dld@0 
 ISA-device: asy0 
 asy0 is /pci@0,0/isa@1/asy@1,3f8 
 8042 device: keyboard@0, kb8042 # 0 
 kb80420 is /pci@0,0/isa@1/i8042@1,60/keyboard@0 
 8042 device: mouse@1, mouse8042 # 0 
 mouse80420 is /pci@0,0/isa@1/i8042@1,60/mouse@1 
 cpu0: x86 (chipid 0x0 GenuineIntel 306C3 family 6 model 60 step 3 clock 2993 MHz) 
 cpu0: Intel(r) Pentium(r) CPU G3220 @ 3.00GHz 
 NOTICE: System detected 256 cpus, but only 1 cpu(s) were enabled during boot. 
 NOTICE: Use "boot-ncpus" parameter to enable more CPU. See eeprom(1M). 
 pseudo-device: stmf_sbd0 
 stmf_sbd0 is /pseudo/stmf_sbd@0 
 pseudo-device: audio0 
 audio0 is /pseudo/audio@0 
 </pre> === 

 xm dmesg output: 
 <pre> === 
 ...and xm dmesg 

 xm dmesg 
  __    __              _    _      ____      _  
  \\ \\/ /___ _ __     | || |    |___ \\    / | 
   \\    // _ \\ '_ \\    | || |_     __) | | | 
   /    \\    __/ | | | |__     _| / __/ _| | 
  /_/\\_\\___|_| |_|      |_|(_)_____(_)_| 
 (XEN) Xen version 4.2.1 (root@localhost) (gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3) Wed Oct    1 00:00:25 EST 2014 
 (XEN) Latest ChangeSet: unavailable 
 (XEN) Bootloader: GRUB 1.99-21ubuntu3.17 
 (XEN) Command line: placeholder 
 (XEN) Video information: 
 (XEN)    VGA is text mode 80x25, font 8x16 
 (XEN)    VBE/DDC methods: V2; EDID transfer time: 1 seconds 
 (XEN) Disc information: 
 (XEN)    Found 1 MBR signatures 
 (XEN)    Found 1 EDD information structures 
 (XEN) Xen-e820 RAM map: 
 (XEN)    0000000000000000 - 000000000009d800 (usable) 
 (XEN)    000000000009d800 - 00000000000a0000 (reserved) 
 (XEN)    00000000000e0000 - 0000000000100000 (reserved) 
 (XEN)    0000000000100000 - 00000000d22ba000 (usable) 
 (XEN)    00000000d22ba000 - 00000000d22c1000 (ACPI NVS) 
 (XEN)    00000000d22c1000 - 00000000d26f0000 (usable) 
 (XEN)    00000000d26f0000 - 00000000d2b06000 (reserved) 
 (XEN)    00000000d2b06000 - 00000000d7ee5000 (usable) 
 (XEN)    00000000d7ee5000 - 00000000d8000000 (reserved) 
 (XEN)    00000000d8000000 - 00000000d875f000 (usable) 
 (XEN)    00000000d875f000 - 00000000d8800000 (reserved) 
 (XEN)    00000000d8800000 - 00000000d8fae000 (usable) 
 (XEN)    00000000d8fae000 - 00000000d9000000 (ACPI data) 
 (XEN)    00000000d9000000 - 00000000da71c000 (usable) 
 (XEN)    00000000da71c000 - 00000000da800000 (ACPI NVS) 
 (XEN)    00000000da800000 - 00000000db836000 (usable) 
 (XEN)    00000000db836000 - 00000000dc000000 (reserved) 
 (XEN)    00000000dd000000 - 00000000df200000 (reserved) 
 (XEN)    00000000f8000000 - 00000000fc000000 (reserved) 
 (XEN)    00000000fec00000 - 00000000fec01000 (reserved) 
 (XEN)    00000000fed00000 - 00000000fed04000 (reserved) 
 (XEN)    00000000fed1c000 - 00000000fed20000 (reserved) 
 (XEN)    00000000fee00000 - 00000000fee01000 (reserved) 
 (XEN)    00000000ff000000 - 0000000100000000 (reserved) 
 (XEN)    0000000100000000 - 000000041fe00000 (usable) 
 (XEN) ACPI: RSDP 000F0490, 0024 (r2 DELL    ) 
 (XEN) ACPI: XSDT D8FEE080, 007C (r1 DELL      CBX3       1072009 AMI       10013) 
 (XEN) ACPI: FACP D8FFA448, 010C (r5 DELL      CBX3       1072009 AMI       10013) 
 (XEN) ACPI Warning (tbfadt-0232): FADT (revision 5) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 [20070126] 
 (XEN) ACPI: DSDT D8FEE188, C2BE (r2 DELL      CBX3            14 INTL 20091112) 
 (XEN) ACPI: FACS DA7FE080, 0040 
 (XEN) ACPI: APIC D8FFA558, 0062 (r3 DELL      CBX3       1072009 AMI       10013) 
 (XEN) ACPI: FPDT D8FFA5C0, 0044 (r1 DELL      CBX3       1072009 AMI       10013) 
 (XEN) ACPI: SLIC D8FFA608, 0176 (r3 DELL      CBX3       1072009 MSFT      10013) 
 (XEN) ACPI: SSDT D8FFA780, 0539 (r1    PmRef    Cpu0Ist       3000 INTL 20120711) 
 (XEN) ACPI: SSDT D8FFACC0, 0AD8 (r1    PmRef      CpuPm       3000 INTL 20120711) 
 (XEN) ACPI: SSDT D8FFB798, 01C7 (r1    PmRef LakeTiny       3000 INTL 20120711) 
 (XEN) ACPI: HPET D8FFB960, 0038 (r1 DELL      CBX3       1072009 AMI.          5) 
 (XEN) ACPI: SSDT D8FFB998, 036D (r1 SataRe SataTabl       1000 INTL 20120711) 
 (XEN) ACPI: MCFG D8FFBD08, 003C (r1 DELL      CBX3       1072009 MSFT         97) 
 (XEN) ACPI: SSDT D8FFBD48, 3528 (r1 SaSsdt    SaSsdt        3000 INTL 20091112) 
 (XEN) System RAM: 16302MB (16694032kB) 
 (XEN) Domain heap initialised 
 (XEN) ACPI: 32/64X FACS address mismatch in FADT - da7fe080/0000000000000000, using 32 
 (XEN) Processor #0 7:12 APIC version 21 
 (XEN) Processor #2 7:12 APIC version 21 
 (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 
 (XEN) Enabling APIC mode:    Flat.    Using 1 I/O APICs 
 (XEN) Table is not found! 
 (XEN) Using scheduler: SMP Credit Scheduler (credit) 
 (XEN) Detected 2993.154 MHz processor. 
 (XEN) Initing memory sharing. 
 (XEN) xstate_init: using cntxt_size: 0x240 and states: 0x3 
 (XEN) I/O virtualisation disabled 
 (XEN) Enabled directed EOI with ioapic_ack_old on! 
 (XEN)    -> Using old ACK method 
 (XEN) Platform timer is 14.318MHz HPET 
 (XEN) Allocated console ring of 16 KiB. 
 (XEN) VMX: Supported advanced features: 
 (XEN)    - APIC MMIO access virtualisation 
 (XEN)    - APIC TPR shadow 
 (XEN)    - Extended Page Tables (EPT) 
 (XEN)    - Virtual-Processor Identifiers (VPID) 
 (XEN)    - Virtual NMI 
 (XEN)    - MSR direct-access bitmap 
 (XEN)    - Unrestricted Guest 
 (XEN) HVM: ASIDs enabled. 
 (XEN) HVM: VMX enabled 
 (XEN) HVM: Hardware Assisted Paging (HAP) detected 
 (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB 
 (XEN) Brought up 2 CPUs 
 (XEN) *** LOADING DOMAIN 0 *** 
 (XEN)    Xen    kernel: 64-bit, lsb, compat32 
 (XEN)    Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x234a000 
 (XEN)    Dom0 alloc.:     0000000408000000->0000000410000000 (4049800 pages to be allocated) 
 (XEN)    Init. ramdisk: 000000041d1dd000->000000041fe00000 
 (XEN)    Loaded kernel: ffffffff81000000->ffffffff8234a000 
 (XEN)    Init. ramdisk: ffffffff8234a000->ffffffff84f6d000 
 (XEN)    Phys-Mach map: ffffffff84f6d000->ffffffff86ea8d58 
 (XEN)    Start info:      ffffffff86ea9000->ffffffff86ea94b4 
 (XEN)    Page tables:     ffffffff86eaa000->ffffffff86ee5000 
 (XEN)    Boot stack:      ffffffff86ee5000->ffffffff86ee6000 
 (XEN)    TOTAL:           ffffffff80000000->ffffffff87000000 
 (XEN)    ENTRY ADDRESS: ffffffff81d06210 
 (XEN) Dom0 has maximum 2 VCPUs 
 (XEN) Scrubbing Free RAM: .done. 
 (XEN) Initial low memory virq threshold set at 0x4000 pages. 
 (XEN) Std. Loglevel: Errors and warnings 
 (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) 
 (XEN) Xen is relinquishing VGA console. 
 (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) 
 (XEN) Freed 240kB init memory. 
 (XEN) no cpu_id for acpi_id 3 
 (XEN) no cpu_id for acpi_id 4