Activity
From 2011-08-23 to 2011-09-21
2011-09-21
-
11:05 PM Feature #1518 (Resolved): dis should support AMD SVM/AMD-V/Pacifica instructions
-
- Resolved in r13460 commit:5c0e6f4dc413
-
-
- Resolved in r13462 commit:4d04e1a5e9ff
-
-
- Resolved in r13461 commit:8a356f48c838
-
11:01 PM Bug #1548: dis crashes disassembling anything kernel-ish
- This is triggered by symbols in special sections (such as COMMON or ABS). Since they are relocated at run-time by th...
-
- While disassembling practically anything kernel-like, I'm seeing dis crash....
-
04:43 PM Bug #1333: High kernel cpu usage & dtrace hang on idle system
- Rich,
Rich Lowe wrote:
> Hey Aubrey.
>
> Notice how deadline_timer_reprogram is not actually doing a delta cal... -
- Aubrey,
I concur with Miha, the issue is no longer happening (up 45 hours no kernel CPU leak), here are the output... -
- Hey Aubrey.
Notice how deadline_timer_reprogram is not actually doing a delta calculation, but comparing the time ... -
08:03 AM Bug #1333: High kernel cpu usage & dtrace hang on idle system
- Hi, here are the outputs of the commands, and by the way, the cpu usage in kernel is still very low, so this for sure...
-
05:58 AM Bug #1333: High kernel cpu usage & dtrace hang on idle system
- Please provide the output of the following commands
1. #psrinfo -vp
2. #prtdiag
3. #ucodeadm -v
Thanks,
-Aubrey -
03:26 PM Bug #1546 (Feedback): Cannot Successfully Reboot
- System comes down but doesn't complete reboot. Upgrade from 151 was successful, the system hangs after syncing when...
-
- Bryan was going to dig at this, and either deploy the shoddy script, or come up with an alternative, or something (re...
-
-
-
-
-
-
-
- Richard Elling and Mike Hersch are (were) going to do this, via some other source.
-
-
06:19 AM Bug #1533: function 'strncmp' from libc have periodicly core dump
- What I should have said is that the strncmp man page states that "The arguments s, s1, and s2 point to strings". T...
-
- Igor S.Kozhukhov wrote:
> I think we have to update our libc - why we have core dump instead of 'WARNING' or "ERROR"... -
03:34 AM Bug #1359 (Closed): dbus may need work to run in a non-global zone
- Duplicate of #1249.
-
- This is obviously not resolved.
2011-09-20
-
- install the onbld package (I'm going to fix the env file anyway, because it's sadly the primary means by which people...
-
11:02 AM Bug #1007: env files should define MULTI_PROTO
- I wonder how would I get built copy of bldenv.sh without first using the bldenv.sh to do a `dmake setup` :-) sounds l...
-
- For the record, this only occurs because people are using nightly.sh and bldenv.sh, rather than the built copies whic...
-
02:48 PM Bug #995: boot message: No randomness provider enabled for /dev/random
- for info https://www.illumos.org/issues/1425
I'm having this [still] after upgrading to oi_151a... -
- Aubrey,
As Miha indicated - I too am interested in the root cause, and more importantly the impact does making thi... -
- Hi,
I also applied the set apix:apic_timer_preferred_mode = 0x0 and as far as I can see now, kernel usage is still... -
- Glad to see the interrupt storm is gone. Let's wait to see if CPU kernel leak is fixed.
-
- Aubrey,
My basic test suite take about 4 days to be definitive, but after running for 8 hours with... -
- Hi Jon,
It looks like your system is experiencing exactly the same issue as Miha's.
To check if this issue is f... -
09:48 AM Bug #1484: upgrading to oi_151a blocking on hard drive
- Tried updating again yesterday and it still fails.
last known working kernel:
root@jadlaptop:~# pkg info consolid... -
- Debugging KVM stuff, this has been driving me crazy also. I'll get this in.
Is sommerfeld@alum the right email to... -
- NFS client doesn't use privileged ports for mount requests in IPv6 case, which makes at least FreeBSD's mountd reject...
2011-09-19
-
- Aubrey,
======================================
After adding the following line to the /etc/system and rebooting... -
- okay, this looks quite weird, intr occurs before the target is due.
But if you add the following line to the /etc/... -
- The output of the script is:
0 30881 deadline_timer_reprogram:entry target = 521f6a3f580 - now = 521f6a3... -
- Resolved in r13453 commit:f98cb16f36d8
-
- Resolved in r13454 commit:8f54cb1a45aa
-
- Resolved in r13455 commit:7205f7794835
-
- Resolved in r13456 commit:70af5b84f732
-
- Resolved in r13457 commit:571b0355c2e3
-
- Resolved in r13458 commit:5e394d8db762
-
- Resolved in r13459 commit:c3454574dd1a
2011-09-18
-
- Okay, thanks for reporting back...
Looking at the hottest calling stack, something is interesting too.
(1) int... -
- This number grows... as kernel usage does, but harder to see until it reaches some 10-15% kernel usage.
echo apic_... -
- hmmm..., something is very interesting...
It looks like your system is suffering from a interrupt storm. There sho... -
- Hi,
I had a "scheduled" reboot today, to keep the machine up, and before rebooting I ran the command as per your p... -
07:12 PM Bug #1513: need update dependency to package install/beadm
- it will be working on system based on IPS.
If I have system based on DPKG + APT - I couldn't correct identify depend... -
- If you're using the package dependencies from the IPS manifests to define the dependencies in other manifests, you wa...
-
- # ldd /usr/sbin/beadm
libnvpair.so.1 => /lib/libnvpair.so.1
libbe.so.1 => /usr/lib/libbe.... -
- None of the str* functions accept NULL arguments as far as I know. This would be a rather surprising change. The st...
-
- We have our own LIBC and we can do it better.
-
- Igor S.Kozhukhov wrote:
> I think we have to update our libc - why we have core dump instead of 'WARNING' or "ERROR"... -
12:34 PM Bug #1533: function 'strncmp' from libc have periodicly core dump
- `null pointer', I meant.
-
- I think we have to update our libc - why we have core dump instead of 'WARNING' or "ERROR" message?
-
- You are passing a null string as the first argument:
080479d8 libc.so.1`strncmp+0x17(0, 80796bd, 8047a18, 80a6900)... -
- for reproduce you can add flag: --enable-clocale=gnu - to GCC4 build
I know that it is mistake - but it is flag enab... -
- Is there any reproducible test case for this?
-
- I have often core dumps
Loading modules: [ libc.so.1 ld.so.1 ]
> $C
080479d8 libc.so.1`strncmp+0x17(0, 80796bd,... -
01:37 AM Bug #832: need Intel 82579 Gigabit Ethernet PHY support in e1000g
- I've been using the binary you uploaded for almost 24 hours now. It just works. (I have a pci8086,1502 in my Thinkpad.)
2011-09-17
-
- Hi,
It looks like this is not relevant to cpu power management.
From the mpstat log in the first bug reporter's... -
- While implementing AMD-V support for the KVM port to illumos done by Joyent we hit a problem in the dispatcher which ...
2011-09-16
-
08:35 PM Feature #1529 (New): Add mercurial 1.8.4 to GOOD_VERSIONS in tools/onbld/Scm/Version.py
- The latest mercurial version supported in 1.8.1. 1.8.4 isn't in any release per se, but I've built it off the oi-buil...
-
- Resolved in r13452 commit:6bec9720e054
-
06:20 PM Bug #1419 (Closed): nwam defaults multiple interfaces?
- Some implemented NICs have features like this or the NIC is attached to other interfaces on the motherboard causing t...
-
02:56 PM Feature #1527 (Closed): SMB server in non-global zones
- We'd like to be able to run the native CIFS service in non-global zones.
(network/smb/server) This is a big help fo... -
- In $SRC/lib/smbsrv/libsmb/common/smb_sam.c smb_sam_usr_groups()
adds local groups to the token where the user's prima... -
-
- You can add a domain group to a local group, i.e....
-
- Fixed in:
changeset: 13451:4349f1403dad
tag: tip
user: Jason King <jason.brian.king+illumoshg@gma... -
- Fixed in:
changeset: 13451:4349f1403dad
tag: tip
user: Jason King <jason.brian.king+illumoshg@gma... -
05:46 AM Bug #832: need Intel 82579 Gigabit Ethernet PHY support in e1000g
- Pablo Leon wrote:
> Hi
>
> Upgraded OpenIndiana to 151 and the Intel NIC 82579V doesnt work
> prtconf -v | grep... -
- Here are some mdb features I've long wanted:...
2011-09-15
-
11:21 PM Bug #832: need Intel 82579 Gigabit Ethernet PHY support in e1000g
- Hi
Upgraded OpenIndiana to 151 and the Intel NIC 82579V doesnt work
prtconf -v | grep 1503
... -
- I had no idea that OI had updated Mercurial underneath us in that manner.
The change to GOOD_VERSIONS should be made... -
- Incidentally, as far as the cause of removing python-24 dependencies from Illumos goes, these scripts appear to be th...
-
- Rich Lowe wrote:
> This should actually be primarily a matter of updating the mercurial people use to use Python2.6 ... -
- Oracle are shipping 2.7, they're not using it by default.
It'd make sense for us to use, but someone would have to... -
05:26 AM Feature #1514: update onbld GOOD_VERSIONS to use mercurial 1.8.4
- May be make sence to use already 2.7? It seems Oracle already doing this...
-
- Currently there are six packages that declare dependencies on the perl-584 runtime in their manifests:
bayard@scre... -
- I seem to have jumped the gun on claiming a BIOS fix, things looked great for the 10 hours, and then I started seeing...
-
- Right now this looks like it might be a complete BIOS issue. A while back the motherboard vendor told me "we do not ...
-
- While here, remove verbatim "SunOS 5.11" and section descriptions from document titles - it should be handled by nrof...
-
- Bryan added disassembler support for Intel VT/VMX instructions, but not the AMD SVM/AMD-V/Pacifica equivalents, which...
-
- I noticed while working on other things that smbsrv starts its "worker" thread
(via a taskq) with priority 99. That... -
- Proposing an "smbshares" dcmd to go along with the other smb* dcmds.
Example usage:...
2011-09-14
-
- Why?
-
- need add package 'package/svr4' to dependency to install/beadm
-
- This should actually be primarily a matter of updating the mercurial people use to use Python2.6 (or at least to deli...
-
- Mercurial 1.8.4 uses python 2.6 as its interpreter. In order to transition the onbld scripts off of python2.4, GOOD_V...
-
- Thanks Gordon, though your answer made the issue even more cryptic for me :-)
-
- Fixed in:
changeset: 13450:911d80518e4e
tag: tip
user: Yuri Pankov <yuri.pankov@nexenta.com>
date: Tue Sep 13 12:... -
- Once again the CPU on an idle system 'went up in the kernel CPU' from 99.9% idle to 98.6% idle.
And like the last ... -
- Occasionally, if a USB mouse is disconnected after the X server has started, and reconnected, the it no longer appea...
-
- We already have regex(5).
-
- This was filed against the wrong project. "site" is for the illumos.org website.
2011-09-13
-
- Richard - you can ask over in the nwan-discuss at OpenSolaris.org. I consider a bug if you were not getting accurate ...
-
- cpqary3 is actually part of ON's closed bits. Even if the root cause of the panic is fixed, it may make sense to drop...
-
- Fixed in:
changeset: 13450:911d80518e4e
tag: tip
user: Yuri Pankov <yuri.pankov@nexenta.com>
dat... -
- Fixed in:
changeset: 13450:911d80518e4e
tag: tip
user: Yuri Pankov <yuri.pankov@nexenta.com>
dat... -
- Fixed in:
changeset: 13450:911d80518e4e
tag: tip
user: Yuri Pankov <yuri.pankov@nexenta.com>
dat... -
-
- Fixed in:
changeset: 13450:911d80518e4e
tag: tip
user: Yuri Pankov <yuri.pankov@nexenta.com>
dat... -
- Once again the CPU on an idle system 'crept up in the kernel CPU' from 99.4% idle to 98.4% idle.
Oddly enough this... -
- I believe there was concern about whether reformatting the CDDL text might somehow have legal effect. I asked a lawy...
-
- Garrett, I want to do this as part of another issue (#1502), so the question is... should it be done at all?
-
09:35 AM Feature #1503: cannot installoi 148 an AMD Fusion c-50
- Update:
Yesterday I tried some ACPI related options, found on th web. "-B acpi-user-options=0x2", also with "0x8" an... -
- Hi @all
I tried to install oi 148 on a toshiba nb550d (Amd Fusion C-50) but was unable to load the live system fro... -
- # Capitalize document titles
# Fix dates to be in ISO-8601 format (not sure about this)
# Remove unknown .mk and .r... -
- Perhaps debatable whether this is a bug or feature request,
but I was surprised about this:
When taskq_create_pr...
2011-09-12
-
- Once again, you say feature (and even close the report !), but you do not justify the reason extra interface(s) (like...
-
04:27 PM Bug #1129: Try to install OI 151 on HP 360
- There is a new cpqary3 available from HP's website. Sadly we can not redistribute it due to restrictive licensing terms.
-
- Built with gcc acpica-nightly-2011-09-10 with updated 'acpica' bits (from danmcd - refer to IRC) the bits ran fine, b...
-
01:17 AM Bug #1497 (New): OpenIndiana svn_151 support on Adaptec 6xxx
- I hope this is the correct place to submit this.
I have Adaptec 6805 installed on OpenIndiana svn_151 and am tryin...
2011-09-11
-
- It could be insomnia talking, but I'd swear that rtls never sets rtlsp->ifname, though it does use it in numerous dia...
-
- r13449 commit:6ee1ec4bf42c
-
03:03 AM Bug #1493 (New): New termcap.h in /usr/include breaks xterm build
- This was discovered when building XNV on oi_151 with a recent illumos. The changeset delivered by #1168 delivers a /u...
2011-09-09
-
- resolved in r13448 commit:f03238cace0b
-
- Fixed in:
changeset: 13447:99622235dae0
tag: tip
user: Jerry Jelinek <jerry.jelinek@joyent.com>
... -
04:40 PM Bug #1487: some binaries fail to work in a chroot environment.
- Andrew Stormont wrote:
> Elf files with the interpreter set to /usr/lib/libc.so.1 work for the most part but in a ch... -
- Elf files with the interpreter set to /usr/lib/libc.so.1 work for the most part these but in a chroot environment fai...
-
- My prior systems were the oi_148b ISO, I reproduced the same thing on a oi_151a system, it lost networking after abou...
-
- I am currently running on kernel: illumos d89753efabc8.
I have recently tried upgrading my system to the latest in... -
- Debugging another issue, I have mdb repeatedly crashing while trying to walk a list_t...
2011-09-08
-
- need add dependency from 'service/storage/avs/cache-management' to 'driver/storage/sv'
if install only 'driver/sto... -
- mdb is aware of the width of its output iob (commonly terminal), but doesn't provide it in the module API.
If it...
2011-09-07
-
- I have left a system running for 14 days, until it reached 25% or so in kernel usage when completely idle, which is j...
-
- The system became unstable after 14 hours, and I lost 'ssh' connectivity and then even a iLOM GUI session was unusabl...
-
10:41 AM Bug #832: need Intel 82579 Gigabit Ethernet PHY support in e1000g
- Any news on the 82579LM support?
Cheers -
- While automating something tedious using ::bp -c, we've discovered that there is an issue if the commands used in the...
2011-09-06
-
- GCC4 warns when a function of non-void type doesn't return (or exit via functions which it knows exit). We should ma...
-
- WRT Sandy Bridge issues WRT power.conf and/or deep-cpu-idle issues for chips/chipsets like E3-1240 Xeon's this issue ...
-
- _Note the attached file "power_cpu_issue_PLUS_0hours.txt" is from an initial reboot, it can be compared with the prio...
-
- Continuing testing, and as Miha indicated it is always in the 'kernel usage' the problem never shows up in 'top' in ...
-
- We've noticed that zfs recv can sometimes trigger a ddt_prefetch panic even when no DDT is present. This turns out to...
-
- This is a slightly exotic AHCI controller which probably needs a set of workarounds.
-
-
- Ticket closed. The Marvell 88SE9128 is not being supported at this time by oi-dev.
-
01:48 PM Bug #1474 (Closed): Core dump in svccfg
- Hi,
When I type:
>svccfg
>select ssh
>describe -t start
Segmentation Fault (core dumped)
==> core dump genera... -
05:21 AM Bug #1473 (New): nwam (even network/physical:default ?) starting before single-user
- While debugging a frustrating dladm/dlmgtd problem, I noticed that nwamd was starting BEFORE single-user mode was rea...
-
- Ken Mays wrote:
> A feature. Shows IPv4/IPv6 setup on your Realtek NIC.
You say feature, but do not explain why a... -
- A feature. Shows IPv4/IPv6 setup on your Realtek NIC.
2011-09-05
-
- An alternative to including firmware in illumos would be to let the distros deal with it - for example, OI could make...
-
- While looking at another issue, I noticed that mdb_printf and friends appear not to be flagged as being printf-like, ...
-
- Sigh, actually, it's missing a format entirely. I mis-counted. Still surprised there's no warning, however.
-
- While here, I'll also fix the output of the "PEND" header in the ::cycinfo -V output, which is missing since it has a...
-
- ...
-
- Running current illumos bits, the ::cycinfo -v columnar output (below the tree) doesn't line up under the column head...
-
07:33 PM Bug #1439: Panic when booting on IBM SystemX
- New version, thanks to richlowe for spotting the mistake
-
- I made a patch for this, can someone please check this? Works for me, but no guarantees otherwise. Might be good if i...
-
- strtol doesn't set errno = EINVAL if conversion failed, while http://pubs.opengroup.org/onlinepubs/009695399/function...
-
- Very nice, the workaround solved my issues with not being able to correctly save the dump. Can we get the real fix (i...
-
05:51 AM Feature #1469 (Resolved): ttyc/ttyd should be an allowed console device
- Currently ttya and ttyb are the only ttys, which are allowed to be a console device.
This is a problem for none-SU... -
- This primary is supported and widely used everywhere else.
-
- re_format(5) manpage, describing the regexes used by re library, imported as part of #2, is missing. This can be impo...
-
- Rich Lowe wrote:
> That was implicit, yes.
>
> My current projects bits boot just fine on the small number of m... -
- That was implicit, yes.
My current projects bits boot just fine on the small number of machines I can try, and a... -
- ...and bootable. I had problems two years ago with this, at least for 32bit...
2011-09-04
-
- I've started looking at porting the iwn driver from FreeBSD, which looks feasible. Separate from that, however, I bel...
-
- Joyent fixed an issue where the DTrace compiler does not error if the size of an undefined structure is taken. We sh...
-
- Joyent added support for variable bases to the DTrace lltostr(). We should pull this change.
-
- Joyent fixed an issue whereby profile and tick probes may not fire within zones.
Described here: http://mail.opens... -
- Joyent extended the DTrace tracemem() action such that a logical variable size could be specified (the ultimate size ...
-
- The DTrace test suite depends on gcc, sun studio, /usr/ccs/bin/make, and various other things.
It should fail quic... -
- Joyent fixed an issue whereby DTrace invocations with large buffers may swamp small-memory systems, leaving them bare...
-
- Joyent have changes adding routines to upper/lower case strings to DTrace.
These are generally inoffensive and somet... -
- This is here primarily as a tracker to indicate that work to get a version of GCC4 prepared for building illumos, and...
-
- Add -useracl and -groupacl primaries to find, returning true when the file's ACL contain entries for specified user/g...
-
-
- GCC deprecated this by mistake, and un-deprecated it in a later release....
-
- should be remove all lines with '#ident' from code because #ident is a deprecated GCC extension for GCC4
-
- My bad.
-
- This problem is not resolved by #1120, #1121.
We use some old RPC interfaces in our "join" code which are not supp... -
- This should be resolved in #1120, #1121.
-
- I think this was fixed by the spoolss thread changes:
#1039 /usr/lib/smbsrv/smbd prevents suspend
There may stil... -
- It's working for me currently also, but I'm not aware of any changes that could have fixed it (perhaps Gordon knows o...
-
- Works for me:...
-
- Resolved in #294.
-
- Resolved in r13446 commit:f342d051b376
2011-09-03
-
- As noted in the recent press. Diginotar, as a certificate authority, suck, and issued a fraudulent google.com certifi...
2011-09-02
-
05:31 PM Bug #1442: apic_timer_reprogram request is too far in future (on vmware workstation)
- > Would this also explain the system clock randomly returning epoch while under VMware?
Unfortunately I have no id... -
- Would this also explain the system clock randomly returning epoch while under VMware? I mention because caiman (whic...
-
- The same behavior was observed on VirtualBox: http://mail.opensolaris.org/pipermail/on-discuss/2010-June/001935.html
-
- There's a problem that appears from time to time on vmware workstation: there're a lot messages in syslog like the fo...
-
12:07 PM Feature #1443 (New): link aggregation network interfaces need non-LACP failover mode of operation
- At the moment it is not possible to create redundant network backends for vnics when the machine's physical interface...
-
- In my case the kernel usage after 7 days uptime has reached almost 20% while idle, so I expect it to die any time now...
-
- Some more findings:
The problem only occurs with recent UEFI versions, 1.11 and 1.12 for my x3650M3. After a downg...
2011-09-01
-
- The proposed fix slightly alters the semantics of TCP_INIT_CWND:
IF (and only if) the socket in question is both ... -
- Doing some more testing ....
The CPU utilization on this box at idle was 99.3% at initial boot time, after about 4... -
04:12 PM Bug #1440 (New): dtrace -c doesn't parse the command string properly
- dtrace -c tokenizes purely by whitespace -- it should use the same tokenizing semantics as a shell.
-
- Right after loading the kernel, there is a panic "vmem_hash_delete: bad free" called from fm_smb_fmacompat, see attac...
-
- > our libcrypto depends on it
libcrypto is part of OpenSSL. Our libcrypto _is_ it.
-
- See my general notes re. dependencies in https://www.illumos.org/issues/1428.
Now openssl in particular has some ... -
- There's currently no mention of `quit' member of the struct FTW, as well as possible values, which are:...
-
- I'm in general agreement with Rich Lowe on this.
I'd like fewer external dependencies in illumos (with an eventual...
2011-08-31
-
- Someone pointed out:
http://src.illumos.org/source/xref/illumos-gate/usr/src/lib/libiscsit/common/libiscsit.h#40
... -
- 255 targets ought to be enough for anybody, right? Well, perhaps not :-)
In cloud environments with a lot of guest... -
- Confirmed with the submitter, this is not a bug.
-
- I cannot reproduce this bug on an OpenIndiana installation.
I ran a trivial TCP_INIT_CWND program (attached) in a ... -
- Since IP Instances integrated, these only require priv_sys_ip_config, not net_config.
-
- Turns out this tunable is made irrelevant as a result of a change to use the metaslab_df_ops allocator. We don't nee...
-
03:27 PM Bug #348: ZFS should handle DKIOCGMEDIAINFOEXT failure
- I'm facing the same issue on an HP DL360 G4p. However, the latest dev-il build of oi_151a (illumos changeset 170f0c3...
-
- After having a conversation with the poster, here's the problem statement:
Consider a server having a policy of dy... -
01:43 PM Bug #1434 (Resolved): TCP_INIT_CWND setsockopt doesn't work on passive connections.
- The current implementation of the IPPROTO_TCP/TCP_INIT_CWND only affects a socket before accept() and connect(). Thi...
2011-08-30
-
- Resolved (we don't use s5fs any more :-)
garrett@thinkpad{12}> hg head
changeset: 13444:c1ed50709bff
tag: ... -
- Sorry I mispoke, either of the below settings in /etc/power.conf *do NOT solve the issue*++
@cpupm disable
cpupm ... -
- changeset: 13444:c1ed50709bff
tag: tip
user: Yuri Pankov <yuri.pankov@nexenta.com>
date: T... -
-
- Resolved in:
changeset: 13443:76ab5b799560
tag: tip
user: Dan McDonald <danmcd@nexenta.com>
da... -
- Attached is a test program (acceptor.c) that'll open a server-side socket. Once you telnet to that port (default == ...
-
- I have the exact same experience and system basically a Supermicro X9SCA-F ( Intel® C204 PCH Chipset) with 16GB RAM, ...
-
09:14 PM Bug #1430 (Resolved): blkdev crashes on synchronous flushes
- common/io/blkdev/blkdev.c:bd_ioctl should check for dkc->dkc_callback in the DKIOCFLUSHWRITECACHE case.
Otherwise, w... -
- setsockopt(fd, IPPROTO_TCP, TCP_INIT_CWND, ....)
requires sys_net_config privileges to set to between 4 and the in... -
- While I'd like illumos to get closer and closer to self hosting (or, perhaps, self-hosting on top of a minimal base, ...
-
- need import libxml2 to illumos tree and provide it by package because some illumo-gate tools have dependency to this ...
-
- OpenSSL is not in illumos for a couple of reasons. The first is that adapting things correctly to the illumos build ...
-
- need import libssl to illumos tree and provide it by package because SSH(server/client) from illumos-gate have depend...
-
- Strange, yet a new interface......
-
-
- I'm not working at this at present, but it should be pretty easy. The configd sources contain a @ucred_is_privileged...
2011-08-29
-
- Resolved in r13442 commit:4adbe6de60c8
With a combination of changes from Bryan Cantrill at Joyent, and my GCC bra... -
- what news about implementation '-maxdepth' to 'find' ?
it is feature very often is using in scripts.
-
- The changes for bug 1361 missed two codepaths (and this code reviewer takes full responsibility for missing them duri...
2011-08-28
-
07:42 PM Bug #1402: fix for #534 causes dire performance regression
- FYI: I have a very limited sample size, (2 working reboots with this fix, a half dozen broken reboots without it)
I... -
- Resolved in r13441 commit:99f81276ef96
-
- Backed out by #1402 and, for the moment, decided invalid.
2011-08-27
-
- thought I'd reboot with a clean messages file to add.
I noticed in the meantime that ipadm thinks differently:
<pre... -
- Hi, not sure this is a bug or a <<feature>>... Finally able to install first 148 text to an AMILO Pa1510 using defaul...
2011-08-26
-
- Resolved in r13440 commit:49d0a9c4f724
-
02:37 PM Bug #1414 (Resolved): libdiskmgmt does not clean up invalid paths
- The installer coredumps when it probes the disks on the hpux box. Here's what the corefile reveals:
> $c
libc.so.... -
- For the sake of the bug, an evaluation.
To keep the amount of CTF data in memory for the kernel small, we remove fro... -
- Preliminary webrev to fix this for all closed bins is here: http://dev1.illumos.org/~jbk/ctfstrip
2011-08-25
-
08:40 PM Bug #1369: disable multi-threaded dump
- I also disable fast reboot on panic since there were times system just stuck on boot after panic.
-
- I think multithreading dump (especially since this is usually done at panic time) is a bad idea. When bad stuff happ...
-
- Honestly, I'm much more inclined to actually remove multi-threaded dump (and likely bzip2 compression, since to be pr...
-
- While #1361 does need a tiny fix, it was not the cause of the regression.
#534, a fix to ddi_dma_mem_alloc(), caus... -
- If the Joyent IP module fixes the problem, I believe this is a regression/bug introduced by #1361. Stay tuned to see...
-
01:54 AM Bug #1402: fix for #534 causes dire performance regression
- ip module from SmartOS distribution fixes issue, suggest upgrade in illumos.
2011-08-24
-
- When an invalid opcode is encountered, dis dumps the instruction stream as hex until it can find the next symbol in t...
-
- The simplest solution appears to be to maintain a table of (virtual address, size) tuples for each section, then assi...
-
- Wow. I'd have expected stripping them from _all_ modules to have broken more stuff. You only needed to do the ones ...
-
- Richard, thank you very much for your help!
I have fixed my problem now.
My steps:
1. run command on /kernel:
f... -
02:50 PM Bug #1380: Xen DomU crashes in vfs_mountroot after image-update to /dev-il
- #1404 is a duplicate of this.
-
02:26 PM Bug #1377: mpt_sas reliably panics when firmware updating
- It appears to only do this if there are any disks or enclosures actually attached, as it reliably fails to panic when...
-
01:49 PM Bug #1408 (New): suid program creates file with owner gid=0 instead of "nobody"
- here is the setup
server:... -
- It uses whichever gettext comes first in PATH, so using hardcoded /usr/bin/gettext looks like a solution to me.
-
10:14 AM Bug #1407 (New): kdcmgr use GNU gettext instead Sun gettext
- Package system/security/kerberos-5...
2011-08-23
-
- This is almost always a mishap caused by the (necessarily) out-of-date CTF information in closed kernel modules.
A... -
- build failed after update to OI-151a and illumos-gate changeset:13438:084a34091b25...
-
- This is a performance request. Many TCP based services use protocols in which the client speaks first. This causes ...
-
- After doing a clean install to OpenIndiana 151 I noticed that iperf was only showing about 5% utilization of the ixbg...
Also available in: Atom